Care of Floor after Coating

• Coatings take approximately 7 to 14 days to cure after application of the last coat.
• It is advised that only socks are worn on the timber floor for the first 72 hours after drying.
• Avoid dragging furniture over coated surface.
• For the first month only use a non-static mop. Do not wet or clean the floor

Protect the floor’s surface with mats & protective pads

• Place mats at entrances and where possible place a mat on the inside as well as outside. 
• Use rugs in high traffic areas.  
• It is recommended that mats be placed on the timber floor 14 days after the coating is applied.
• Ensure protective pads are on all furnishing floor contact points.

Filter Light with Curtains and Blinds

• To avoid fading and discolouring of your timber floor, filter direct light with curtains and blinds. 

Cleaning Your Timber Floor with Floorclean

• Clean your timber floor weekly (or more if required) with a damp mop using Feast Watson Floorclean. Do not flood the floor.
• Floorclean is also suitable for terrazzo, ceramic and lino floors.
• Use an anti-static dust mop regularly to collect dust and debris
• It is advised not to use vacuum cleaners because often the brushes on the vacuum head wear thin and the metal scratches the floor.

Rejuvenate your timber floors with Feast Watson Floorshine

• Feast Watson Floorshine is a water based protective finish ideal for rejuvenating and lifting the gloss level of tired, worn floors. It is available in Gloss and Satin.
• Floorshine is also suitable for vinyl tiles, terrazzo and marble floors.