Printer Friendly

Feast Watson Trade Decking Oil is a penetrating oil finish that will protect and beautify exterior timbers such as decks, walkways, steps and handrails.

2 coats

10 m² /L

New Timber

•  Clean the timber using Feast Watson Woodclean. Allow the timber to dry completely before applying Trade Decking Oil.

Previously Coated Timber:

•  Completely remove any previous coating by sanding, high pressure washing or stripping.
•  Clean the surface of the timber with Feast Watson Woodclean.
•  Allow the timber to dry completely before applying Trade Decking Oil.

• Stir thoroughly with a broad flat paddle before and during use.
• Apply 2 coats of Feast Watson Trade Decking Oil using a brush, applicator or spray.
• If applying by spray, back brush the product into the timber.
• Ensure exposed edges and end grain is coated.

• Touch Dry: 8 hours
• Recoat: 24 hours

These dry times are based on drying conditions of 25ºC and 50% relative humidity.  Dry times will be subject to climatic conditions, film thickness and airflow.

Clean application equipment with mineral turpentine.

4L &10L