Printer Friendly

Feast Watson Floorshine rejuvenates and lifts the sheen level of tired, worn floors and is ideal for use on commercial and domestic floors subject to high traffic. Floorshine is available in gloss and satin sheen levels.

Floorshine is a water based protective finish designed to impart added shine and protection to sealed timber, vinyl, tiles, terrazzo and marble floors. No sanding is required and Floorshine is fast drying with a low odour.

Use over Feast Watson Floorproof, Floorseal, Floorclear, Slate & Pebble Sealer and Paving & Sandstone Sealer.

Satin and Gloss

1 or more until desired gloss level is achieved
  

Recoat

1 hour

Top Coat
NA

40 to 80m²/L

• Ensure the surface is thoroughly clean and free from dust by cleaning with Feast WatsonFloorclean. Floorshine should be applied only to a dry and well cured surface (at least 4 weeks old).

• Do not shake prior to use.  Floorshine should be applied to a well cured surface (at least 4 weeks old).  Apply Floorshine using a clean sponge mop or Feast Watson Applicator and Floor Care Polish Sock.  The surface should be just damped with Floorshine and spread evenly.  Do not allow pools of liquid to form.  Allow the surface to dry and repeat application until desired gloss level is achieved.
• The secret is to apply very thin coats.  This also makes it easier to remove the polish further down the track.
• Floorshine does not require thinning.

1 hour

Water